11
SELECT
to confirm and then your radio will connect the selected station.
Update Stations List
Simply press
SCAN
, or, press
MENU,
then press
or
to ‘
Full scan
’, press
SELECT
to confirm.
To Show the Signal Strength
During playing a DAB/DAB+ program, repeatedly press
INFO
until the LCD screen
display shows a signal bar with the strength of the current station.
The indicator on the signal bar shows the
minimum acceptable signal level.
Note:
Stations with signal strength below
the minimum signal level may not provide
a steady stream of audio.
Manual tune
Press
1.
MENU
press
or
to <
Manual tune
>, press
SELECT
to confirm.
Press
2.
or
to browse channels and press
SELECT
to select the current
channel.
Note
: If there is a multiplex corresponding to this channel and frequency, the display
will show a tuning meter with the signal strength and the multiplex name after a few
seconds.
Press
3.
SELECT
again to exit this order.
The way to Prune
To remove all currently inactive stations, please follow:
Press
1.
MENU
press
or
to <
Prune
>, press
SELECT
to confirm.
Press
2.
or
to ‘
Yes
’, and then press
SELECT
to
confirm.
DRC (Dynamic Range Control) value
You can set the compression level of stations to eliminate the differences in dynamic
range or sound level between radio stations.
Note:
Set DRC to
off
indicates no compression;
Set DRC to
low
indicates little compression;
Set DRC to
high
shows maximum compression.
