background image

8

Guidelines and standards

This product meets guidelines and standards

• 

the Low Voltage Directive ( 2006/95/EC ),

 -

the EMC Directive (2004/108/EC ) and the

 -

CE Mark Directive. Your unit carries the CE mark and complies with all relevant EU 

 -

standards. 

Package Contents Please make sure that all items shown below are available :

DAB / DAB FM Clock Radio with wire antenna,

• 

Power Supply, 6V, 500 mA,

• 

Manual. 

• 

Properties of the device

The DAB + digital radio is a new digital format, through which you can hear crystal 

clear sound in CD quality.

The radio receives on FM frequencies 87.5-108 MHz ( analogue) 174.9 to 239.2 MHz 
and DAB (digital).
You can save 10 station on favorite program places the DAB or FM mode.
The display has a light. This can be activated at different stages (see display illumina

-

tion ). 

Preparing the device for operation 

Connect the device with the supplied AC adapter to the mains (230 V ~ / 50 Hz). 

>To bring power to the device, the cable of the AC adapter needs first be connected 
into the DC 6V (page 5 # 5 ) on the unit and then plug the power adapter into the 
socket 230 V ~ / 50 Hz plug. 

>After the initial installation of the network connection temporarily “ Welcome to 
digital radio “ appears. 
Please unplug the AC adapter from the outlet when not in use, prolonged absence or 
thunderstorms.

Improve antenna reception 

The number and quality of received stations depends on the reception conditions at 

the installation site. With the wired antenna an excellent reception can be achieved. 

This antenna must be aligned in full to get the best reception. Use the small loop at 

Summary of Contents for DigitRadio 100

















Reviews: