When entering programme numbers with several digits, you
have approx. 3 seconds time after pressing a key to complete
the entry.
If you wish to enter a number consisting of a single or two
digits, you can speed up the switching process by keeping the
last digit depressed. for a few seconds.
6.2.3 Using the programme list
>
Press the
OK
key.
The programme list will now be displayed.
(Fig. 6-1)
In TV mode, only TV programmes will be displayed, and in
Radio mode only radio programmes will be shown. The
programme currently selected will be highlighted in yellow.
>
You can now highlight the desired programme, using
the
arrow keys up/down
.
>
Press
OK
to switch to the selected programme.
>
Use the
arrow keys up/down
to move up or down in
the list one slot at a time.
>
Use the
arrow keys left/right
to move through the list
one page at a time.
6.2.3.1 Selecting a list
In order to facilitate the easy location of programmes, the
receiver features several programme lists. You can use a list
of your own personal
Favourites
(see Point 7.1), or you can
have the programmes displayed
alphabetically
or sorted
according to
providers
.
>
Press
OK
. The active programme list will be
displayed.
>
Now press the
red
function key to open a window
showing the types of programme list available
(Favourites List,
Providers
and
ABC ...
).The
active programme list type is highlighted.
(Fig. 6-2)
>
Use the
arrow keys up/down
to select, for instance,
the programme list type
ABC
and confirm by
pressing
OK
.
The alphabetically sorted programme list will be
displayed, containing all programmes.
(Fig. 6-3)
>
Use the
arrow keys up/down
to mark the programme
you wish to view.
>
Confirm by pressing
OK
.
6.2.4 Calling up blocked programmes
If a programme is selected that is protected by the parental
control function, a window will be displayed on the screen
“
Enter PIN
” .
>
Use the
numeric keys
to enter your PIN code.
The selected programme can now be viewed.
16
(Fig. 6-1)
(Fig. 6-2)
(Fig. 6-3)
bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 16
