Channel
In this line, select the television channel/station on which you
wish to record a programme:
>
If necessary, use the
arrow keys
to mark the
Channel
.
>
Press
OK
. A programme list will be displayed.
>
Use the
arrow keys
to mark the desired programme.
>
Confirm by pressing
OK
.
The selected programme will now be accepted into the
timer menu.
Date
>
Use the
arrow keys
to mark the item
Date.
>
Use the
numeric keys
to enter the recording date.
Start
>
Use the
arrow key right
to select the item
Start
.
>
In this line use the
numeric keys
to enter the starting
time.
Stop
>
Repeat the steps as described under “Start” to enter
the stop time, or end of programme.
So that all events can be included, there should be an
interval of at least one minute between the stop time of a
timer event and the starting time of the next timer event!
Repeat (optional)
>
Use the
arrow key right
to mark the item
Rep
.
>
Press
OK
.
A selection window will be displayed, offering various
repeating suggestions.
1x
Timer on
D
Daily repeat
1xW
Repeat once a week
1-5
Repeat only on weekday
6-7
Repeat only on weekends
>
Use the
arrow keys up/down
to select the desired
function.
>
Press
OK
to accept the setting into memory.
>
When you have completed the programming, press
the yellow function key (Accept) to accept and store
the data in memory.
>
Press the
TV/Radio
key to return to normal
operation.
Type
>
Use the arrow key right to mark the item
Type
.
>
Use the OK key to enter the required type in this line.
VCR
Your receiver will be switched on resp. off for the
selected programme. If the receiver is switched on by
means of the timer, most of the functions of the remote
control are disabled, as a safety precaution to prevent
22
bed_anl_DIGITY CI_Quark3_en.qxd 31.01.03 16:47 Seite 22
