20
Format change / Zoom / PiP / PaP / Freeze image
6.10 Format change/Zoom
> Pressing the
Zoom/Format
key runs through the various pre-defined formats
(
original, optimal, always 16:9, full zoom
and
stretch
) and calls the
user-defined
setting,
in which you can adapt the screen according to your requirements.
The following options are available to adapt the picture to your requirements
using the
user-defined
setting:
red/green
control key
Increase/reduce picture height
yellow/blue
control key Increase/reduce picture width
Arrow key up/down
Move picture up/down
OK
key
Run through zoom levels
Arrow key left
Resetting picture settings
> Press the
Return
key, in order to fade out the format change-over.
6.11 PiP-/PaP Function
Your TV set is equipped with both the PiP function (
PiP
=
P
icture
i
n
P
icture)
as well as the PaP function (
PaP
=
P
icture
a
nd
P
icture).
6.11.1 Calling the PiP-/PaP Function
> You can turn the PiP and/or PaP function on by pressing the
PIP
key.
6.11.2 Exchanging PiP-/PaP pictures
> Press the
Return
key to swap the two pictures.
The PiP-/PaP picture becomes the main picture and vice versa.
6.11.3 Turning the PiP-/PaP Function off
There are two possibilities to turn the PiP and/or PaP function off. These differ in whether after
leaving the PiP /PaP mode the main picture or the PiP /PaP picture is to be represented on the screen.
> Pressing the
PIP
key fades out the main picture and the PiP /PaP picture
is now represented as the new main picture.
> Press the
TV/Radio
key, in order to fade out the PiP /PaP picture
and to display the main picture on the entire screen.
6.12 Freeze image
> Press the
Freeze image
key to display the TV picture as a frozen image.
The sound continues to be transmitted unchanged.
> Pressing this key again terminates the freeze image and the TV picture is shown as normal.
