Position B/Option A
>
Use the
arrow keys up/down
to mark the satellite
you wish to receive with the DiSEqC setting Position
B
/Option
A
and confirm by pressing
OK
.
(Fig. 5-7)
Position A/Option B
>
Use the
arrow keys up/down
to mark the satellite
you wish to receive with the DiSEqC setting Position
A
/Option
B
and confirm by pressing
OK
.
(Fig. 5-8)
Position B/Option B
>
Use the
arrow keys up/down
to mark the satellite
you wish to receive with the DiSEqC setting Position
B
/Option
B
and confirm by pressing
OK
.
(Fig. 5-9)
Accepting antenna configuration (DVB-S)
>
When you have completed the settings for the switch
positions, press the
red
function key
Back
.
Check the configuration of your satellite antenna once
more.
>
If you wish to accept the settings you have made,
press the
green
function key
Accept
.
Antenna configuration (DVB-T)
If in your selection of signals to be received you have selec-
ted
Yes
for DVB-T, follow this installation step to adjust the
DVB-T antenna in its optimum position, using the channel
spectrum. In addition, if you are using an active antenna that
is not fed with current via an external mains adapter, you can
use these instructions to switch the antenna current feed to
on.
>
Use the
arrow keys up/ down
to mark the line
Antenna feed
.
>
Use the
arrow keys left/right
to switch the anten-
na feed
on
resp.
off
.
>
Now position your DVB-T antenna so that the signal
level display shows the maximum level for the DVB-T
channels available at your location.
15
(Fig. 5-8)
(Fig. 5-9)
(Fig. 5-7)
BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 15
Summary of Contents for MultyMedia TS 1
Page 81: ...81 BED_AN_Multymedia_TS1 2Q4eng 29 03 2006 10 41 Uhr Seite 81 ...
Page 88: ...Notes 88 BED_AN_Multymedia_TS1 2Q4eng 29 03 2006 10 41 Uhr Seite 88 ...
Page 89: ...Notes 89 BED_AN_Multymedia_TS1 2Q4eng 29 03 2006 10 41 Uhr Seite 89 ...
Page 91: ...91 BED_AN_Multymedia_TS1 2Q4eng 29 03 2006 10 41 Uhr Seite 91 ...
