must still save the satellite position in memory.
>
To do this, use the
arrow keys
to mark the field
save
.
>
Press the
OK
key.
Now, the set test transponder is used to check
whether a signal is being received at this position. It
will also determine whether the position to be saved is
a position that is already included in the pre-pro-
gramming.
(Fig. 9-14)
If this is the case, the following message will be dis-
played:
Orbital position xx determined. Save
satellite ?
(Fig. 9-15)
>
To save the satellite position, use the
arrow keys
left/right
to mark the field
Yes
, and confirm by
pressing
OK
.
If during this checking of the test transponder no pre-
programmed position is recognised, or if the signal is
too weak, appropriate messages will be displayed on
screen.
(Figs. 9-16 and 9-17)
>
To save the satellite position, use the
arrow keys
left/right
to mark the field
Yes
and confirm by
pressing
OK
.
9.4 Current satellite list
The saved satellite positions can be found in the satellite list.
Positions that have not yet been saved are indicated in this
list marked with an “
*
”.
>
To rotate the dish to a position included in the satellite
list, use the
arrow keys
to mark the field
Current
satellite list
.
>
Press the
OK
key.
>
Use the
arrow keys up/down
to select the desired
position.
>
Confirm by pressing
OK
.
The dish will now be rotated to the position selected.
The ongoing rotation will be indicated in the menu by
the blinking message “
turn
”.
9.4.1 Turning to a satellite position
To turn the antenna to the position set in teh satellite list, your
digital receiver is equipped with the function
turn to sat
.
>
To open the window listing the available actions, press
the
blue
function key
Actions
.
>
Now use ther
arrow keys up/down
to mark the line
turn to sat
.
72
(Fig. 9-15)
(Fig. 9-14)
(Fig. 9-17)
(Fig. 9-16)
BED_AN_Multymedia_TS1 2Q4eng 29.03.2006 10:41 Uhr Seite 72
Summary of Contents for MultyMedia TS 1
Page 81: ...81 BED_AN_Multymedia_TS1 2Q4eng 29 03 2006 10 41 Uhr Seite 81 ...
Page 88: ...Notes 88 BED_AN_Multymedia_TS1 2Q4eng 29 03 2006 10 41 Uhr Seite 88 ...
Page 89: ...Notes 89 BED_AN_Multymedia_TS1 2Q4eng 29 03 2006 10 41 Uhr Seite 89 ...
Page 91: ...91 BED_AN_Multymedia_TS1 2Q4eng 29 03 2006 10 41 Uhr Seite 91 ...
