2
The AI5S-DL (= "
A
nalogue
I
nput", DIP
s
witch) translates signals for the data link (DL bus).
These can originate from the two potentiometers, the DIP switch (4 positions, values 0-3) or
from up to 5 difference external 0-10 V sources. It is recommended, that the 0-10V sensors
that are being read out be connected to the same controller as the AI5S-DL itself.
Electrical Connection
Example:
Connection to a UVR16x2 controller
The principles of DL bus cabling are described extensively in the installation instructions for
the freely programmable controllers. The polarity of the data link is interchangeable.
Index
The AI5S-DL forwards values to the data link via 12 indices. These are either measured via
the inputs or set on the device with the potentiometers or manually with the DIP switch.
*Buttons only on model AI5
T
-DL.
Index
Unit
Source
1
Volt
External sensor
Channel 1
2
Volt
External sensor
Channel 2
3
Volt
External sensor
Channel 3
4
Volt
External sensor
Channel 4
5
Volt
External sensor
Channel 5
6
Percent
Potentiometer
P1
7
Percent
Potentiometer
P2
8
Dimensionless
DIP-switch
0-3
9
Dimensionless
Button*
-
10
Dimensionless
Button*
-
11
Dimensionless/Flip-Flop Button*
-
12
Dimensionless/Flip-Flop Button*
-
13
Not relevant for AI5-DL
14
Dimensionless
Serial number of the module
15
Dimensionless
Software version (without decimal
points)
