background image

 

EC- DECLARATION OF CONFORMITY

 

Document- Nr. / Date: 

TA12025 / 19.11.2012 

Company / Manufacturer: 

Technische Alternative elektronische SteuerungsgerätegesmbH. 

Address: 

A- 3872 Amaliendorf, Langestraße 124 

This declaration of conformity is issued under the sole responsibility of the manufacturer. 

Product name: 

FRISTAR 

Product brand: 

Technische Alternative GmbH. 

Product description: 

Fresh water station 

The object of the declaration described above is in conformity with Directives: 

2006/95/EG 

Low voltage standard 

2004/108/EG 

Electromagnetic compatibility 

2011/65/EU 

RoHS Restriction of the use of certain hazardous substances 

2006/42/EG 

Machinery Directive (WILO pump) 

Employed standards: 

 

EN 60730-1: 2011 

Automatic electrical controls for household and similar use 

–  

Part 1: General requirements 

EN 61000-6-3: 2007 
                +A1: 2011 

Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emis-
sion standard for residential, commercial and light-industrial environments 

EN 61000-6-2: 2005 

Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Im-
munity for industrial environments 

For WILO pump:

 EN 809, EN ISO 12100-1, EN ISO 12100-2, EN ISO 14121-1, EN 60335-1, EN 

60335-2-51, EN 61800-3, EN 61800-5-1 

Position of CE - label:

  On packaging, manual and type label 

 

 
 
 

Issuer: 

Technische Alternative elektronische SteuerungsgerätegesmbH. 
A- 3872 Amaliendorf, Langestraße 124 

This declaration is submitted by

 

 

 

Kurt Fichtenbauer, General manager,  
19.11.2012 

This declaration certifies the agreement with the named standards, contains however no warranty of 
characteristics. 

The security advices of included product documents are to be considered. 

 

 

Summary of Contents for FRISTAR





















Reviews: