IT 8
SINCRONIZZARE LA STAZIONE METEO CON UN ALTRO TRASMETTITORE ESTERNO
1.
Sul retro della stazione meteo, premere una volta
▲/CHANNEL
. L’icona
compare sotto la temperatura e l’umidità esterne.
2. Premere e tenere premuto
▲/CHANNEL
finché l'icona
lampeggia, la stazione meteo cerca il segnale dell'altro trasmettitore esterno su
Channel 2.
3.
Aprire il vano batteria del secondo trasmettitore, portare l'interruttore alla posizione centrale contrassegnata con
2
, quindi inserire due batterie
AAA nel vano batteria osservando la corretta polarità +/-. Riposizionare il coperchio delle batterie.
4.
La temperatura esterna e l'umidità del secondo trasmettitore apparirà sull'LCD insieme all'icona
in pochi secondi. Se i dati continuano a
non comparire, provare a rimuovere e riposizionare le batterie del secondo trasmettitore.
5.
Per sincronizzare la stazione meteo con un terzo sensore esterno, ripetere lo stesso passaggio scegliendo
sulla stazione meteo e
selezionando
3
sull’interruttore del terzo trasmettitore.
SCORRIMENTO AUTOMATICO DELLE TEMPERATURE ESTERNE E DELL'UMIDITÀ DI DIVERSI
TRASMETTITORI
Premere
▲/CHANNEL
uno alla volta finché l’icona
lampeggia emettendo un breve bip. Quindi la temperatura esterna e l'umidità di diverso
trasmettitore esterno sarà visualizzata per alcuni secondi alternativamente con
,
,
lampeggiante.
Per interrompere lo scorrimento automatico, premere per una volta
▲/CHANNEL
per ritornare alla visualizzazione costante della temperatura e
dell'umidità del trasmettitore
, l'icona
resta fissa sul display.
INDICAZIONE BATTERIA SCARICA DEL TRASMETTITORE ESTERNO
L'icona
appare per indicare che il livello della batteria del trasmettitore esterno è basso. Può essere necessario sostituire le batterie del
trasmettitore esterno con delle nuove.
Condizioni meteo di freddo estremo (ad es. sotto i 14°F) causeranno anche bassa tensione della batteria.
RISOLUZIONE DEI PROBLEMI
Nel caso in cui la stazione meteo mostri delle informazioni o cifre errate, ciò potrebbe essere influenzato da interferenze o scariche elettrostatiche
provenienti da altri dispositivi. Usare un oggetto appuntito per premere
RESET
sul retro della stazione meteo. L'unità sarà ripristinata alle
impostazioni predefinite e sarà necessario impostare nuovamente orario, calendario e ora di allarme.