background image

WS 6449

 

GB 6 

 

Snooze function 

1. 

Press “

SNOOZE/LIGHT

” button and the white backlights activates for 10 seconds. 

2. 

When alarm sounds, press the “

SNOOZE/LIGHT

” button to trigger snooze for 10 minutes. The alarm icon 

flashes when the snooze feature is active. 

 

Note: 

  To  stop  alarm  for  one  day,  press  any  button  but 

SNOOZE/LIGHT

” button,  while in snooze mode. The 

alarm icon will stop flashing. 

 

Backlight function 

 

With adapter, the display will always have backlight on.  

 

Without adapter, 

press the “

SNOOZE/LIGHT

” button to turn on backlight for 10 seconds. 

 

MAX/MIN values:   

 

In normal display mode, press the 

“MIN/MAX”

 button to display maximum temperature/humidity. Press 

the 

“MIN/MAX”

 button once more to display minimum temperature/humidity. 

 

Press and hold the 

“MIN/MAX”

 button for 3 seconds in the corresponding interface to clear max or min 

temperature/humidity memory. 

 

After 5 seconds the display will return back to the normal display mode.  

 

The MIN/MAX values will also be automatically cleared at every midnight (0:00). 

 

Barometer and bar and data of history for the past 12 hour of air pressure 

 

 

Air pressure history can be displayed in hPa , for the past 12 hours   

 

The bar graph indicates the air pressure history trend over the last 12 

hours in 6 intervals: 0h, -1h, -2h, -3h, -6h, and -

12h. The “0h” represents 

the current full hour air pressure recording. The columns represent the 
“hPa” (0, ±2, ±4, ±6) at a specific time. The “0” in the middle of this scale 

is equal to the current pressure and each change (±2, ±4, ±6 ) represents 
how high or low in “hPa“ the past pressure was compared to the current 

pressure.  

 

For accurate barometric pressure trends, the weather station should 

operate at the same altitude for recordings (i.e. it should not be moved from the ground to the second floor 

of the house). When the unit is moved to a new location, discard readings for the next 12 hours. 

 

Weather forecast 

5 Weather forecast symbols can be displayed: sunny, partly sunny, cloudy, rainy, stormy

 

 

 

Note: 

 

The weather forecast is determined by temperature, humidity and air pressure. The forecast symbol may 

not match with the current weather. 

 

 

Changing temperature unit 

Summary of Contents for WS 6449








Reviews: