EN10
Note :
Once the weather tendency indicator has registered a change in the air
pressure, it will remain permanently visualized on the LCD.
Indoor temperature and MIN/MAX records
The indoor temperature and indoor MIN/MAX records are displayed on
the second section of the LCD.
Note:
The MIN/MAX indoor temperature range is -9ºC to + 38ºC with
1°C resolution.
Outdoor temperature and MIN/MAX records
The outdoor temperature and outdoor MIN/MAX records are displayed
on the last section of the LCD.
Note:
The MIN/MAX outdoor temperature resolution is range -40ºC to +
60ºC with 1°C resolution.
Resetting the indoor and outdoor MIN/MAX records
Note:
All the MIN/MAX records will be reset at the same time.
1.
In normal display mode, press and hold the
MIN/MAX RESET
key
for 3 seconds. This will reset the indoor and outdoor MIN/MAX
temperatures.
868 MHz reception check
The weather station should receive the temperature data within 3
minutes after set-up.
If the temperature data is not received 3 minutes
after setting up (not successfully continuously, the outdoor display
shows “- - -” ), please check the following points:
1.
The distance of the weather station or temperature sensor should
be at least 1.5 to 2 meters away from any interfering sources such
as computer monitors or TV sets.
2.
Avoid positioning the weather station onto or in the immediate
proximity of metal window frames.
3.
Using other electrical products such as headphones or speakers
operating on the same signal frequency (868MHz) may prevent
correct signal transmission and reception.
4.
Neighbors using electrical devices operating on the 868MHz signal
frequency can also cause interference.
