OPERATION
1B
1.5
Safety at Work
You must wear eye protection when operating the Vibro-Surfacing Screed to prevent injury from
concrete particles, It’s neccesary wear hearing protection against the sound produced by the
machine.
Do not attempt to handle any of the moving parts whilst the motor is running.
The manufacturer will not accept responsibilities, for accidents if they derive from structure
modification of the machine.
In adition to our recommendations the safety regulations of each country in force.
This machine is not designed to work in explosive atmospheres. The motor is protected against water
splashes, but not against immersion or disposing above.
1.6
Conditions of Use
The Wall Cutter machine, is designed to give maximum satisfaction to the user, as long as the
instructions of use and maintenance contained in this manual.
This machine is, due to its original design and high power,the ideal machine to attain a high quality
finish the groove and to have a long life.
This machine is not designed to work concrete walls, it can produce the break of the cutter.
1.7
Assembly Instructions
The Wall cutter is sent with the cutter Ø 90 mm. disassembled, to mount the cutter it is neccesary do
it in the proper way Fig.: 1.7-1, the incorrect assembly produce the break of the hard metal tips.
To facilitate the disassembly, put the aluminum washer that is given with the machine, between the
axis and the cutter.
The equipment, is provided with a fixed key of 17 mm. and a key of 2 pivots.
Fig.: 1.7-1
INGLÉS
1B-5
Summary of Contents for Rozadora Castor 2300
Page 37: ......
