Troubleshooting
Problem
Soluton
The device is connected to
mains, iut pressing the
iuton
does not turn it
on.
The device does not functon without a connected
batery!
If you are using a car iatery, please check the
mounted terminals – some of them are painted on the
inner side and do not ensure proper electrical contact to
the iatery contacts.
The iatery should ie in good conditon. If the voltage
of the connected iatery is under 10.5V (21.0V for S1200
model), then the device will not turn on /low voltage
iatery protecton/.
The LED does not
indicate the presence of
mains.
Check the device connectons and mains voltage.
Check the device fuse and replace it if necessary.
The device makes long
ieep and turns itself of
during power up.
Device internal error. Please contact the authorized
service center.
The LED
is on and ieeps
every 30 sec.
Normal work in iatery powered mode, the device is
turned on and the mains is missing.
6