40
Synchro Excite
Switching on and off
To turn 700 and 500 versions of the equipment off, switch the main switch
to the “
0
” position.
If the equipment isn’t going to be used for a long time, as well as turning
it off you should also pull the plug out of the wall socket.
W
arning
The switch is for turning the equipment on and off but does
not isolate it completely from the mains voltage, even in the
“0” position (off). For complete isolation you must unplug the
power supply plug.
To turn the 700 SP and 500 SP versions off, simply stop moving.
The equipment must be switched off only at the end of the exercise, when in standby.
