JOG NOW : Service & maintenance manual - rev. 6.2
Pagina 9.9
To scroll through the list of parameters, press the
+
or – effort level keys to display the next or the
preceding item.
To modify a parameter value, it is necessary to press the
ENTER
key: when the current parameter
value starts to blink, press the
CLEAR
key to erase the current value and then use the number keys
to enter the desired new value. Save the changes made by pressing the
ENTER
key.
To cancel the operation, press the
CLEAR
key for a few seconds.
The various parameters are described below.
9.2.1.
L
OW KIT PARAMETER
This function provides access to parameters used for modifying certain settings of the lower
assembly. To access this menu, when the display shows:
LOW KIT PARAM.
Press
ENTER
. This function is structured as follows:
LOW KIT PARAM.
Par.13
Par.01
WRITE TO
LOW KIT ?
DEFAULT
SETTINGS ?
READ FROM
LOW KIT ?
.......................
In addition to the 13 configuration parameters, this function also includes the 3 sub-functions
described below:
Summary of Contents for Jog Now Excite+ 700
