RECLINE EXCITE: Service & Maintenance Manual - rev. 1.1
Page 7.7
7.6. DISASSEMBLING THE GUARDS
Figure 7.6-1
Carry out the procedure described in paragraph
7.5. “ Disassembling the pedals and the pedal
cranks”.
1. Back off the 7 screws
a
on either side of the
machine using a 4-mm Allen wrench.
Figure 7.6-2
2. Remove the right guard first.
3. Remove the seven pins
c
from the left guard.
4. Remove the left guard.
To reassemble the guards, carry out the above
steps in reverse order.
During reassembly, lock down the
screws using a torque wrench set for 0.8
Nm.
Summary of Contents for Recline Forma
