22
Run Personal
A
13
Aligning the treadmill
When the equipment is running the treadmill must be centrally aligned
in relation to the frame. If it tends to move to the right or left or is not
centrally positioned, it needs aligning.
The alignment is done with the equipment running.
Set the adjustment screw (
A
), located at the back of the equipment,
opposite the control panel support riser, so that the belt is centrally
aligned with the back roller.
!
Warning
The treadmill realigns
slowly
: turn the adjustment screw 1/4
or 1/2 a turn and then check the result before turning it again.