SYNCHRO FORMA
16
Maintenance
Warnings
The safety of the equipment is assured only on the condition that it is carefully inspected every two weeks for any signs of damage and/
or wear.
Replace defective and worn components immediately, or alternatively remove the equipment from service.
For maintenance actions not described in this manual, call in the Technogym Technical Service.
Cleaning and looking after the equipment
The equipment should always be kept clean and free of dust, in accordance with normal hygiene and sanitary rules.
To clean the
control panel
, proceed as follows:
- turn the equipment off by switching the switch to
0
;
- unplug the equipment power cable from the wall socket;
- clean the control panel with a damp, but not wet, cloth.
Every week, clean
the equipment completely
:
- turn the equipment off by switching the switch to the
0
position;
- unplug the equipment power cable from the wall socket;
- clean the external parts with a damp sponge;
- move the equipment to one side so that you can vacuum clean underneath it.
Do not use chemicals or solvents. Do not use abrasive products on polished parts.
Do not rub too hard on the control panel.
Summary of Contents for Synchro Forma
Page 1: ...SYNCHRO FORMA User manual ...
Page 26: ...SynchroForma_uk AD 0SM00750 ...
