24
There is also double sided tape included with the wall mount. On smooth surfaces this can be
used instead of drilling holes. The mounting surface can, however, affect the transmission range.
If for example the unit is att/ached to a piece of metal, it may then either reduce or increase the
transmitting range. For this reason, we recommend not placing the unit on any metal surfaces or
in any position where a large metal or highly polished surface is in the immediate proximity
(garage doors, double glazing, etc.). Before securing in place, please ensure that the
Moonphase wall clock can receive the 433MHz signal from the Temperature transmitter at the
positions that you wish to situate them.
The Outdoor Transmitter simply clicks in or out of the holder. When inserting or removing the
Outdoor Transmitter from the wall holder please hold both units securely.
CARE AND MAINTENANCE:
•
Avoid placing the units in areas prone to vibration and shock as these may cause damage.
•
Avoid areas where the units can be exposed to sudden changes in temperature, i.e. direct
sunlight, extreme cold and wet/moist conditions as these will lead to rapid changes which
reduces the accuracy of readings.
•
When cleaning the LCD and casing, use a soft damp cloth only. Do not use solvents or
scouring agents.
•
Do not submerge the units into water.
•
Immediately remove all low powered batteries to avoid leakage and damage. Replace only
with new batteries of the recommended size.
•
Do not make any repairs to the units. Please return it to the original point of purchase.
Opening and tampering with the units may invalidate the warranty.
SPECIFICATIONS:
Temperature measuring range
Indoor
: 0ºC to +50ºC with 0.1ºC resolution
+32ºF to +122ºF with 0.2ºF resolution
("OF.L" displayed if outside this range)
Outdoor
:
-29.9ºC to +69.9ºC with 0.1ºC resolution
-21.8°F to +157.8°F with 0.2°F resolution
(“OF.L” displayed if outside this range)
Temperature checking interval
Indoor
: every 10 seconds
Outdoor
: every 5 minutes
