background image

 

21

MOON PHASE 

The Moonphase wall clock will also display all 12 Moon phases throughout the year accordingly 
to the set calendar: 

 

 

 

New Moon        Small Waxing           Large Waxing   First Quarter            Small Waxing      Large Waxing 

 Crescent                    Crescent                                                Gibbous               Gibbous                          

 

 

 

 

  FullMoon 

Large Waning         Small Waning     Last Quarter          Large Waning         Small Waning            

                              Gibbous

                    

Gibbous                                             Crescent                  Crescent 

 

OUTDOOR TEMPERATURE TRANSMITTER: 

The temperature is measured and transmitted to the Moonphase wall clock every 1 minute. The 
moonphase wall clock will update the temperature display every 5 minutes. 
The range of the outdoor temperature transmitter may be affected by the temperature. At cold 
temperatures the transmitting distance may be decreased. Please bear this in mind when 
positioning the transmitter. Also the batteries may be reduced in power during periods of extreme 
cold temperatures. 

 

433MHz RECEPTION CHECK FOR OUTDOOR TEMPERATURE TRANSMITTER 

The Moonphase wall clock will receive the temperature data within 4 minutes. If the temperature 
data is not being received 4 minutes after setting up (the display shows “- - .-°C”), then please 
check the following points: 
1. 

The distance of the Moonphase wall clock or outdoor temperature transmitter should be at 
least 2 meters away from any interfering sources such as computer monitors or TV sets. 

2. 

Avoid placing the receiver onto or in the immediate proximity of metal window frames. 

3. 

Using other electrical products such as headphones or speakers operating on the same 
signal frequency (433MHz) may prevent correct signal transmission and reception. 

4. 

Neighbors using electrical devices operating on the 433MHz signal frequency can also 
cause interference. 

 

Note:

 

 

When the 433 MHz signal is received correctly, do not re-open the battery cover of either the 
outdoor temperature transmitter or moonphase wall clock, as the batteries may spring free from 

Summary of Contents for WS-8118














Reviews: