background image

 

22

the contacts and force a false reset. Should this happen accidentally then reset all units (see 

Setting up

 above) otherwise transmission problems may occur. 

 

The maximum transmission range is 100 meters from the outdoor temperature transmitter to the 
moonphase wall clock (in open space). However, this depends on the surrounding environment 
and interference levels. If no reception is possible despite the observation of these factors, all 
system units have to be reset (see 

Setting up

). 

 

CHANGING THE DISPLAY MODE (DATE, SECONDS, AND TEMPERATURES) 

There are four possible display modes to view the day, seconds, and temperatures.  
The 

indoor temperature/outdoor temperature/date/weekday is the default. 

 

To change the display:

 

1. 

Press the + key.  The display should now show the 

seconds/outdoor 

temperature/date/weekday.

 

2. 

Press the + key a second time and the display will now show the 

indoor 

temperature/seconds/ date/weekday.

 

3. 

Press the + key third time and the display will now show the 

indoor temperature/outdoor 

temperature/date/seconds.

 

4. 

Press the + key a fourth time and the display will return to the normal display of 

indoor 

temperature/outdoor temperature/date/weekday

 

POSITIONING 

Before permanently mounting ensure that the Moonphase wall clock is able to receive DCF 
signals from the desired location. Also, extreme and sudden changes in temperature will 
decrease the accuracy of the weather wall clock. 

 

To achieve a true temperature reading, avoid mounting where direct sunlight can reach the 
outdoor temperature transmitter. It is recommended to mount the outdoor temperature 
transmitter on a North-facing wall or in any well shaded area. The maximum transmitting range is 
100 meters obstacles such as walls, concrete, and large metal objects can reduce the range. 

 

Place both units in their desired location, and wait approximately 10 minutes before permanently 
mounting to ensure that there is proper reception. The outdoor temperature transmitter is not 
waterproof and should not be placed anywhere it will become submerged in water or be directly 
in the rain. 

 
 
 
 

Summary of Contents for WS-8118














Reviews: