background image

 

28

FORECAST

 

FORECAST 

FORECAST 

TOGGLING AND RESETTING THE INDOOR READINGS: 

1. 

Press the IN key to toggle between the indoor current, MAX/MIN temperature and 
humidity data. The time and dates of the recorded data will also be displayed in the 
time and calendar sections (for temperature data only). 
Once to show the MAX indoor temperature and humidity data with the recorded time 
and date.  
Twice to show the MIN indoor temperature and humidity data with the recorded time 
and date.  
Three times to return to the current displayed values 

2. 

Once the MIN or MAX data is displayed, press and hold the SET key for 3 seconds to 
reset the respective MIN or MAX record to current temperature and humidity data, and 
current time, date display.  

Note:

 The MIN or MAX data needs to be reset individually. 

 

WEATHER FORECAST AND WEATHER TENDENCY: 

 

WEATHER FORECASTING ICONS: 

Weather icons in the third section of LCD can be displayed in any of the following 
combinations: 

 
 
 
 

      

                                

                   

 

    Sunny                      Cloudy with sunny intervals                        Rainy 

 

For every sudden or significant change in the air pressure, the weather icons will update 
accordingly to represent the change in weather. If the icons do not change, then it means 
either the air pressure has not changed or the change has been too slow for the Weather 
station to register. However, if the icon displayed is a sun or raining cloud, there will be no 
change of icon if the weather gets any better (with sunny icon) or worse (with rainy icon) 
since the icons are already at their extremes. 

 

The icons displayed forecasts the weather in terms of getting better or worse and not 
necessarily sunny or rainy as each icon indicates. For example, if the current weather is 
cloudy and the rainy icon is displayed, it does not mean that the product is faulty because it 
is not raining. It simply means that the air pressure has dropped and the weather is expected 
to get worse but not necessarily rainy. 

 

Note:

 

 

After setting up, readings for weather forecasts should be disregarded for the next 12-24 
hours. This will allow sufficient time for the Weather station to collect air pressure data at a 
constant altitude and therefore result in a more accurate forecast. 

 

Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather 
forecasting feature is estimated to have an accuracy level of about 75% due to the varying 
areas the Weather station has been designed for use. In areas that experience sudden 
changes in weather (for example from sunny to rain), the Weather station will be more 
accurate compared to use in areas where the weather is stagnant most of the time (for 
example mostly sunny). 

 

If the Weather station is moved to another location significantly higher or lower than its initial 
standing point (for example from the ground floor to the upper floors of a house), discard the 
weather forecast for the next 12-24 hours. By doing this, the Weather Station will not mistake 
the new location as being a possible change in air-pressure when really it is due to the slight 
change of altitude.  

 

Summary of Contents for WS 9032
















Reviews: