1136 4-Slot Battery Charger User Guide V1.1
© Technology Solutions (UK) Ltd 2013
10
TROUBLESHOOTING AND MAINTENANCE
TROUBLESHOOTING
Symptoms
Possible Cause
Action
The charger indicates a fault
(fast flash)
The battery is too hot.
Leave the battery to cool down; the
charger will automatically start to
charge once the battery temperature
falls.
Move the charger to a cooler location.
The battery is too cold.
Leave the battery to warm up; the
charger will automatically start to
charge once the battery temperature
rises.
Move the charger to a warmer location.
The battery has a fault
Do not use the battery.
The charger indicates full
charge (continuous indicator)
after a short period of time.
The battery is already charged.
Use the battery.
The battery has a fault.
Do not use the battery.
The charge status indicator
does not light when a battery
is inserted.
The charger is not powered.
Verify that the power supply is
connected and powered. The blue
power indicator on the front of the
charger must be lit.
The battery retaining clip is not in the
correct location for the battery type.
Move the battery retaining clip to the
correct location.
The battery is not properly located.
Ensure the battery has been fully
pushed into the compartment and
is held by the hook on the battery
retaining clip.
The battery has a fault.
Do not use the battery.
www.tsl.uk.com
