background image

1062 User Guide.doc

1062

Technology Solutions (UK) Limited reserves the right to change its products, specifications and services at any time 

without notice.  Technology Solutions (UK) Limited provides customer assistance in various technical areas, but does 
not have full access to data concerning the uses and applications of any customer’s products. Therefore, Technology 

Solutions (UK) Limited assumes no responsibility for customer product design or for infringement of patents and/or 

the rights of third parties, which may result from assistance provided by Technology Solutions (UK) Limited.  No part 

of this document may be reproduced in any form without the written consent of the author.

Page 16 of 39

Any RFID or  barcode  data  scanned by the Handscanner  will then  appear  at 
the top of the window and also in the ‘Default text window’ whilst SmartWedge 
Basic  has  focus  (the  cursor  is  flashing  in  the  ‘Default  text  window’).  Launch 
the application that is to receive the data, for example Excel, and position the 
cursor  at the data  entry  point.  Scan  data will then be entered into the target 
application. By default all scanned data is terminated with CR LF characters to 
automate data entry.  A typical screenshot is shown below:

Note that if CAPS lock is selected on the PC keyboard all of the alphabetical 
characters  will  have  their  case  reversed  so  a  lower  case  character  from  a 
barcode  will  appear  as  an  upper  case  character  in  the  receiving  application 
and vice versa.
Minimise  SmartWedge  Basic  using  the  cross  in  the  top  right  hand  corner  of 
the  window.    SmartWedge  Basic  minimises  to  the  System  Tray.  Hover  the 
mouse over the icon to see the current status, double click to restore the main 
window or right click to restore, disconnect or exit the application. Even when 
SmartWedge  Basic  is minimised  the ‘Most  recent  scan data’  entry is always 
updated with the most recently received text.
When SmartWedge Basic is no longer required, click ‘Disconnect’ to close the 
link to the Handscanner and exit SmartWedge Basic from ‘File > Exit’.

Summary of Contents for Handscanner








































Reviews: