Triscan 1084 User Guide V13.doc
1084
Technology Solutions (UK) Ltd reserves the right to change the specifications of products and services without
notice. No part of this document may be reproduced in any form without the written consent of the author.
Page 13 of 19
7 Technical specifications
7.1 Summary of specifications
The following table summarises the Tri-Scan 1084
’s intended operating environment and
technical hardware specifications:
Capacitive Fingerprint Sensor
Acquisition rate
15 frames/second
Sensor resolution
508dpi
Pixel array
256 x 360 pixels
Sensor area
12.8 x 18.0 mm
ESD protection
IEC 61000-4-2 Level 4 ±15kV
Raw image size
Approximately 100kbyte
Template size
Algorithm dependent
– typically 300-400 bytes
Optical Fingerprint Sensor
Sensor resolution
500dpi
Identification time (1:500)
1s typical
Authentication time (1:1)
0.9s typical
False Acceptance Rate (FAR)
Adjustable down to 10
-8
Pixel array
256 x 400 pixels
Sensor area
14 x 22 mm
ESD protection
IEC 61000-4-2 Level 4 ±15kV
Raw image size
Approximately 100kbyte
Template size
Algorithm dependent
– typically 100-400 bytes
Local storage capacity
500 users, 1000 templates
Contact Smartcard Reader
Compliance
ISO7816-1,2,3,4 PC/SC, EMV2000 Level 1 capable.
T=0, T=1 Protocol. I2C
Connector
Meets ISO 7816-2, rated for >100 000 insertions.
Card size
Full (ID-1)
Card support
Up to 420Kbps card interface, clock frequency up to 8MHz,
5V, 3V, 1.8V smart cards.
