Triscan 1084 User Guide V13.doc
1084
Technology Solutions (UK) Ltd reserves the right to change the specifications of products and services without
notice. No part of this document may be reproduced in any form without the written consent of the author.
Page 8 of 19
5 Using the Tri-Scan 1084
5.1 Driver and software installation
Drivers and software are supplied in the Demonstration kit and Software Development kit.
Separate documents are provided in these kits providing installation and deployment
information.
For information on the installation and operation of third party applications refer to the
appropriate software manual.
5.2 Contact smartcard operation
The smartcard is inserted at the bottom of the Tri-Scan 1084 unit. The contacts should face
upwards.
Figure 5: Inserting a smartcard into the Tri-Scan 1084
Before the Triscan 1084 can be used the driver must be installed (see section 5.1). The
functionality of the Triscan 1084 is then determined by the application on the MC70/75 and
the smartcard or memory card.
Correct
orientation;
the
smartcard
contacts
are
facing upwards.
Incorrect
orientation;
the
smartcard contacts are facing
downwards.
