Technosoft 2018
IV
iPOS4808 VX Technical Reference
a set of setup data that can be downloaded into the drive EEPROM or saved on a PC file.
At power-on, the drive is initialized with the setup data read from its EEPROM. With
EasySetUp it is also possible to retrieve the complete setup information from a drive
previously programmed.
EasySetUp can be downloaded free of charge from
Technosoft web page
iPOS CANopen Programming (part no. P091.063.iPOS.UM.xxxx)
– explains how to program
the iPOS family of intelligent drives using
CANopen
protocol and describes the associated
object dictionary for
CiA 301 v.4.2
application layer and communication profile and
CiA
DSP 402
v3.0
device profile for drives and motion control now included in IEC 61800-7-1
Annex A, IEC 61800-7-201 and IEC 61800-7-301 standards
Motion Programming using EasyMotion Studio (part no. P091.034.ESM.UM.xxxx) –
describes how to use the EasyMotion Studio to create motion programs using in
Technosoft Motion Language (TML). EasyMotion Studio platform includes
EasySetUp
for
the drive/motor setup, and a
Motion Wizard
for the motion programming. The Motion
Wizard provides a simple, graphical way of creating motion programs and automatically
generates all the TML instructions.
With EasyMotion Studio you can fully benefit from a
key advantage of Technosoft drives – their capability to execute complex motions without
requiring an external motion controller, thanks to their built-in motion controller. A demo
version of EasyMotion Studio (with EasySetUp part fully functional) can be
downloaded free of charge from Technosoft web page
TML_LIB v2.0 (part no. P091.040.v20.UM.xxxx)
– explains how to program in
C, C++,C#,
Visual Basic or Delphi Pascal
a motion application for the Technosoft intelligent drives
using TML_LIB v2.0 motion control library for PCs. The TML_lib includes ready-to-run
examples that can be executed on
Windows
or
Linux
(x86 and x64).
TML_LIB_LabVIEW v2.0 (part no. P091.040.LABVIEW.v20.UM.xxxx)
– explains how to
program in
LabVIEW
a motion application for the Technosoft intelligent drives using
TML_LIB_Labview v2.0 motion control library for PCs. The TML_Lib_LabVIEW includes
over 40 ready-to-run examples.
TML_LIB_S7 (part no. P091.040.S7.UM.xxxx)
– explains how to program in a PLC
Siemens
series S7-300 or S7-400
a motion application for the Technosoft intelligent drives using
TML_LIB_S7 motion control library. The TML_LIB_S7 library is
IEC61131-3 compatible
.
TML_LIB_CJ1 (part no. P091.040.CJ1.UM.xxxx)
– explains how to program in a PLC
Omron
series CJ1
a motion application for the Technosoft intelligent drives using TML_LIB_CJ1
motion control library for PLCs. The TML_LIB_CJ1 library is
IEC61131-3 compatible
.
TML_LIB_X20 (part no. P091.040.X20.UM.xxxx)
– explains how to program in a PLC
B&R
series X20
a motion application for the Technosoft intelligent drives using TML_LIB_X20
motion control library for PLCs. The TML_LIB_X20 library is
IEC61131-3 compatible
.
TechnoCAN (part no. P091.063.TechnoCAN.UM.xxxx)
– presents TechnoCAN protocol – an
extension of the CANopen communication profile used for TML commands
IO-iPOS4808 (part no. P091.027.IO-iPOS4808.UM.xxxx) –
describes the IO iPOS4808 I/O
extension board included in the
iPOS4808
Starter Kits.