Technosoft 2016
13
IO-iPOS4808MY Technical Reference
3.3.5 J9 – Digital outputs connector
Pin
Pin name
Type Function
1
GND
-
Ground
2
OUT0
O
General-purpose/ digital output OUT0
3
OUT1
O
General-purpose/ digital output OUT1
3.3.6 J10 – Digital outputs connector
Pin
Pin name
Type Function
1
OUT2/ Error
O
Drive error digital output OUT2/Error
2
OUT3/ Ready
O
Drive ready digital output OUT3/Ready
3
OUT4
O
General-purpose/ digital output OUT4
3.3.7 J11 – Supply I/O connector
Pin
Pin name
Type Function
1
+V
LOG
I/O
Logic supply: +9 to +36V
DC;
Internally connected to all +V
LOG
pins
2
+12V In
I
External supply input. Internally connected to J16 pin 6.
3
GND
-
Ground
3.3.8 J12 – Digital inputs connector
Pin
Pin name
Type Function
1
GND
-
Ground
2
IN0
I
General-purpose digital input IN0
3
IN1
I
General-purpose digital input IN1
4
IN2/ LSP
I
Positive limit switch digital input IN2/LSP
3.3.9 J13 – Digital inputs connector
Pin
Pin name
Type Function
1
LSN
I
Negative limit switch digital input IN3/LSN
2
IN4
I
General-purpose digital input IN4
3
IN5/ ENA
I
Drive enable digital input IN5. If the drive does not have STO inputs, the pin is used
as Drive Enable
4
+V
LOG
I/O
Logic supply: +9 to +36V
DC;
Internally connected to all +V
LOG
pins
3.3.10 J14 – Analog inputs connector
Pin
Pin name
Type Function
1
GND
-
Ground
2
Ref 0-5V
I
External analogue reference signal (mono-polar 0 to +5V )
3
Ref ±10V
I
External analogue reference signal (bipolar -10V to +10V )
4
+5V Out
O
+5V
OUT
output supply (generated by iPOS drive)
