© Technosoft 2016
III
IO-iPOS4808MY Technical Reference
instructions.
With EasyMotion Studio you can fully benefit from a key advantage of Technosoft
drives – their capability to execute complex motions without requiring an external motion
controller, thanks to their built-in motion controller.
A demo version of EasyMotion Studio
(with EasySetUp part fully functional) can be downloaded free of charge from
Technosoft web page
iPOS CANopen Programming
(part no. P091.063.iPOS.UM.xxxx)
– explains how to program the
iPOS drives using
CANopen
protocol and describes the associated object dictionaries for the
supported profiles.
CAN application layer over EtherCAT Programming
(part no. P091.064.UM.xxxx)
– explains
how to program the Technosoft intelligent drives using
CoE
protocol and describes the
associated object dictionary.
TML_LIB v2.0
(part no. P091.040.v20.UM.xxxx)
– explains how to program in
C, C++,C#, Visual
Basic or Delphi Pascal
a motion application for the Technosoft intelligent drives using
TML_LIB v2.0 motion control library for PCs. The TML_lib includes ready-to-run examples that
can be executed on
Windows
or
Linux
(x86 and x64).
TML_LIB_LabVIEW v2.0
(part no. P091.040.LABVIEW.v20.UM.xxxx)
– explains how to program
in
LabVIEW
a motion application for the Technosoft intelligent drives using TML_LIB_Labview
v2.0 motion control library for PCs. The TML_Lib_LabVIEW includes over 40 ready-to-run
examples.
TML_LIB_S7
(part no. P091.040.S7.UM.xxxx)
– explains how to program in a PLC
Siemens
series S7-300 or S7-400
a motion application for the Technosoft intelligent drives using
TML_LIB_S7 motion control library. The TML_LIB_S7 library is
IEC61131-3 compatible
.
TML_LIB_CJ1
(part no. P091.040.CJ1.UM.xxxx)
– explains how to program in a PLC Omron
series CJ1 a motion application for the Technosoft intelligent drives using TML_LIB_CJ1
motion control library for PCs. The TML_LIB_CJ1 library is
IEC61131-3 compatible
.
TML_LIB_X20
(part no. P091.040.X20.UM.xxxx)
– explains how to program in a B&R PLC series
X20 a motion application for the Technosoft intelligent drives using TML_LIB_X20 motion
control library for PCs. The TML_LIB_X20 library is
IEC61131-3 compatible
TechnoCAN
(part no. P091.063.TechnoCAN.UM.xxxx)
– presents TechnoCAN protocol – an
extension of the CANopen communication profile used for TML commands
If you Need Assistance …
If you want to …
Contact Technosoft at …
Visit Technosoft online
http://www.technosoftmotion.com/
Receive general information
or assistance (see Note)
Ask questions about product
operation or report suspected
problems (see Note)
Make suggestions about,
or report errors in
documentation.
http://www.technosoftmotion.com/
Email:
contact@technosoftmotion.com
Mail: Technosoft SA
Avenue des Alpes 20
CH-2000 Neuchatel, NE
Switzerland
