Introduction
CAN UP 27 online telematics gateway. Operation manual. Version 1.0
© Technoton, 2017
8
CAN UP 27 is represented by the following models:
1) CAN UP 27 Standard
— provides standard functionality allowing to:
- perform data processing (
SPN
) using
S6 Technology
;
- convert analog signals of vehicle's sensors to SPN;
- generate and send Onboard reports to the Server/by E-mail/SMS.
2) CAN UP 27 Pro*
— has advanced functionality allowing to:
- analyze the data of standard automotive CAN bus, automatically distinguishing
telematics SPNs;
- perform data processing (SPN) using S6 Technology;
- convert analog signals of vehicle's sensors to SPN;
- generate and send Onboard reports to the Server/by E-mail/SMS.
Functional features of CAN UP 27 Standard.
1) Event recognition
– rapid changes of Parameters, significant for monitored object, for
example:
refueling / fuel syphoning;
speeding, RPM, route deviation, leaving geozone, duration of continuous driving;
turning on/off auxiliary equipment of object;
loading/unloading, exceeding allowed axle load.
2) Report generator
– receiving prepared information, which does not require further
processing on the Server:
changes of operational parameters of the object are continuously registered in
nonvolatile memory;
data composition can be flexibly adjusted by user - a choice of more than
3000 Parameters;
possibility of adaptive Report generation - upon Event recognition, when parameters
of movement are changing (passing route section, movement direction angle
change etc.);
recoding minimal changes of rapidly changing Parameters (engine speed, power
network voltage, speed).
3) Report registration
– accumulating reports and preparing them to transfer to the Server.
each Report is registered in internal memory of Unit according to formation time;
sequence of sending Reports to the Server is determined: emergency (alarm button,
road accident) - first, important and informational - second;
storage of Reports in case of inability to transfer (no network) and sending them as
soon as possible (back in network coverage area).
4) Onboard electrical network monitoring
– remote diagnostics of onboard network
health, detection and prevention of malfunctions.
Monitoring current voltage;
Notifying on network malfunction;
Notifying on exceeding duration of starter operation;
Registering Vehicle operation time from onboard network, from battery;
Registering starter operation time.