Turn to page 3
1
2
USER MANUAL
Packing List
Open the package and check to see if the following items are included.
USER MANUAL
Quality
Certification
Electric scooter
Tool kit
1
The schematic diagram used in the product information is only for reference. The actual situation of the product may be
different from that of the product. The actual situation of the product in the packing box shall prevail.
The related products, power cord and plug pictures and descriptions in this article are for reference only
Assembling Your Electric Scooter
3
Diagram
2
Unfold the stem and fasten it.
Then unfold the kickstand to
support the Electric Scooter.
Confirm the power supply
interface. Please align the
indicator arrows and make
a connection.
Install handle with the
included hex wrench.
Insert the brake cable into the
brake handle. Turn the
aluminium fixators so that the
brake cable does not fall out .
Flathead Screw
Battery Charger
4
Wear an approved helmet
and other protective gear to
minimize any possible injury.
1.
Long press to turn on the
power supply,Power on the
scooter and check the
indicator lamp power level.
Charge the scooter if the
battery level is low.
2.
Stand on the footrest with
one foot and push off with
another foot to start gliding.
3.
Put your other foot on the
footrest to keep both feet
stable. Press the throttle on
the right hand to speed up
when you are balanced.
4.
Slow down by releasing the
throtle; and brake by
squeezing the brake lever.
5.
To turn, shift your body
weight and turn the handle
slightly.
6.
Learning to Ride
Battery Cabin
Hub Motor
Brake Light
Buckle
Hook
Electronic Throttle
Rear Fender
Quick Release Lever
Kickstand
Folding Mechanism
Front Fork
Front Shock Absorber
Stem
Disc brake
Rear Shock Absorber
Charge Port
Handlebar
Brake Lever
Bell
Dashboard
&
Power Button
Headlight
1
2
3
1
1
2
Techno PRO Electric scooter
APP
Please take good care of this user manual (keep it as a backup).
Please read the instructions before installing and using the product.
Speedometer
Modes
Bluetooth
Headlight
Battery Level
Power Button
Display the current speed of the Scooter
The battery power is indicated by 5 bars, each
representing approximately 20% of a full battery.
Press the button to turn the Electric Scooter on;
and press and hold the button for 3 seconds to turn The Electric Scooter off.
When the Electric Scooter is on, press the button to turn the headlight on/off
Double-click the button to switch the riding mode
Three modes available. "L" for Energy saving mode(smooth
acceleration, suitable for beginners), "S" for Sport mode
(powerful, only recommended for skilled riders),"L" "S" off
stands for standard mode
The icon indicates that the Scooter
has been successfully connected to the mobile device.
Cruise control
Use the APP to start cruise at fixed speed
Lock
Use the APP to lock the scooter.
