16E1+4ETH Optical Multiplexer
14
manual).
A clean, steady environment and firm installation should be provided
for desktop or wall hanging equipment.
5.1.2 Cautions about installation
Avoid severe liberation and mechanical damage during the process of
delivering and installation.
Arrange fiber appropriately, fiber bending radius≥50 mm.
Check voltage and polarity meet with back panel, or it will cause
permanent damage to the equipment.
Fiber connector can’t be contaminated, wipe optical fiber head slightly
using alcohol, or it will affect transmission. If the fiber connector not
butt joint well, it may be cause power decline, adjust fiber connector
according to practical situation.
The installation location should be convenient for personal passing and
equipment movement.
The environment should be dry, clean and ventilated well.
Essential static-protective is needed during the installation and
maintenance, ground the chassis to increase anti-interference
capability and prevent lightning strike. Before use the equipment,
independence work ground and protect ground should provided, make
sure it ground well.
