16E1+4ETH Optical Multiplexer
2
1 General information
16E1+4ETH Optical Multiplexer is the 16E1 point-to-point optical transport
equipment that uses the FPGA chips and it is easy to upgrade. It is single board
structure and the largest transmission capacity is 16E1 and 4*100M line
Ethernet data. the Ethernet bandwidth is set on base on multiple of 32K.The
outer design use the standard 19 inches rack, so the volume is small, weight is
light and operation is convenient and credit.
2 product character
Provides 16 E1 transparent transmission ;
Provide 4 100M line Ethernet channel,support mutual negatiate, Ethernet
bandwidth is set on base on multiple of 32K.;
Provice one hotline channel for option;
The rate of optical port is 155Mbps, transmission range can reach 25KM,
40KM, 60KM, 80KM or 120KM;
E1 interface code is HDB3
，
E1 vibration characteristic conforms to ITU-
T G.703
、
G.823 and G.742;
Ethernet port supports full/half duplex, 10M/100M auto-ataptable;
Ethernet port supports VLAN function and has 4 devision mode for user
selection;
Ethernet package size support 1916 byte and 4 Ethernet port could be
set seperately;
Has complete alarm function and can monitor remote device status;
Supports E1 loop from remote so as to detect and manage device
conveniently;
The combination AC220V and DC-48V for redundant
