background image

                                                                                                                           

 

order 

White and Orange 

White and Green 

Orange 

Green 

White and Green 

White and Orange 

Blue 

Blue 

White and Blue 

White and Blue 

Green 

Orange 

White and Brown 

White and Brown 

Brown 

Brown 

Description:    Crossed  line  A  end  "1"      connects  with "3";  A end 

"2" connects with "6".When the connected Ethernet line is very long, 

you  should  be  sure  that  "1"and  "2"  "3"and"6"are  a  pair  line  of 

Twisted Pair. 

Telephone Interface 

There are eight RJ45 connectors on back panel, support 1-2 analog line telephones 

access. The device supports two interfaces: FXO and FXS. If this device is built-in FXO 

module, the interface is FXO interface,

 

you can insert the phone line that that through 

switch  into  FXO  interface.  If  this  device  is  built-in  FXS  module,  the  interface  is  FXS 

interface, you can insert it into telephone directly. 

One  RJ45  connector  can  support  2Channel  analog  telephone  access  (telephone 

interface),PIN defined as follows: 

FXO/FXS Pin define: 

Summary of Contents for E1-16 EM2/4 Series

















Reviews: