TSR 2800-30 Hardware Installation Manual
-3-
9 SFP Gigabit SFP optical port
It is connected through the optical
fiber.
10
SLOT1
Slot 1 for HIC card
The HIC sub-card is supported.
11
SLOT2
Slot 2 for HIC card
The HIC sub-card is supported.
12 ANT1 Antenna port 1
13
SLOT3
Slot 3 for HIC card
Supports HIC sub-cards (only
supporting the audio card and the
8-asynchronous card)
14 ANT2 Antenna port 2
The back template of TSR 2800-30 router is shown in the following figure:
Table 1-3 Parts at the back template of TSR 2800-30
No. Abbrev.
Name
Remarks
1
Power
AC power socket
AC100-240V
2 SWITCH
Power
switch
"ON" means the switch is
opened, while “OFF” means the
switch is closed.
1.2 Characteristic Parameters of the Router
The following table shows the characteristic parameters of TSR 2800-30
modularized router:
Memory
EPROM: 512K Bytes
Flash Memory: 32M Bytes
DDRII SDRAM: 256MBytes
Standard configuration
2 Ethernet 10/100/1000M
electric-optical-multiplexed ports
One Console port
2 USB ports
3 slots for HIC cards
Specifications
Working
temperature/humidity
0
℃
-40
; 10%
℃
-85% no condensation
H
a
rdw
a
re characteri
sti
cs
Storage temperature/
humidity
-20
℃
-65
; 5%
℃
-95% no condensation
