TECHTRAIL Enduro TrailHead, User Manual

19

english

20

english

SETTING THE INSTRUMENT FUNCTIONS

SETTING THE INSTRUMENT FUNCTIONS

SETTING THE TIMERS

Enduro watches are equipped with 3 independent 24-hour Timers with enhanced 
functionality. In 

TIMER MODE

, you can scroll through Timers 1 through 3 by 

PRESSING

 the 

STOP/NEXT

 key.

Timer options are:

CD-STOP:

 Counts down, then stops at 00:00:00.

CD-REPEAT: 

Counts down, then automatically starts to count down again.

CD-UP:

 Counts down, then automatically begins counting up. Example: you can 

program a 10-minute warm up followed by a 45-minute workout. The timer counts down 
10 minutes, then begins timing like a regular chronograph.

TRAIN:

 Trainer mode has up to 9 settable segments. The length of each segment 

can be set independently. Each segment counts down to 00:00:00 and automatically 
advances to the next segment which begins counting down immediately in a continuous 
loop.  

SETTING THE TIMERS 

(

CONTINUED

)   

In Timer mode:

1.

 Select 

TIMER 1

, 

2

 or 

3

 by 

PRESSING

 the

 STOP/NEXT

 key.

2.

PRESS & HOLD

 the 

SET/CLEAR

 key to enter the setting 

sequence.

3.

 Select 

TIMER MODE

 (

CD-STOP, CD-REPEAT, CD-UP

 or 

TRAIN

) by 

PRESSING

 the 

START/LAP

 or 

STOP/NEXT

keys.

4.

  Advance to set 

HOURS

 by 

PRESSING

 the 

MODE

 key. 

Adjust by 

PRESSING

 the 

START/LAP

 or

 STOP/NEXT

 keys.

5.

  Advance to set

 MINUTES

 by 

PRESSING

 the 

MODE

 key. 

Adjust by 

PRESSING 

the 

START/LAP

 or 

STOP/NEXT 

keys.

6.

  Advance to set 

SECONDS

by 

PRESSING

 the 

MODE

 key. 

Adjust by 

PRESSING

 the 

START/LAP

 or 

STOP/NEXT

 keys.

7.

 PRESS 

SET/CLEAR

 to exit the setting sequence.

(

CONTINUED

NEXT

PAGE

)