TECHTRAIL Enduro TrailHead, User Manual

21

english

22

english

SETTING THE INSTRUMENT FUNCTIONS

SETTING THE INSTRUMENT FUNCTIONS

SETTING THE TIMERS 

(

CONTINUED

)

If TRAIN mode is selected:

1.  Program Segment 1:

 Advance to set 

HOURS

 by 

PRESSING

 the 

MODE

 key. 

Adjust by 

PRESSING

 the 

START/LAP 

or 

STOP/NEXT

 keys.

2. 

Advance to set 

MINUTES

 by 

PRESSING

 the 

MODE

 key. Adjust by 

PRESSING

the 

START/LAP

 or 

STOP/NEXT

 keys.

3. 

Advance to set 

SECONDS 

by 

PRESSING

 the 

MODE

 key. Adjust by 

PRESSING 

the 

START/LAP

 or 

STOP/NEXT

 keys.

4. 

Advance to 

PROGRAM NEXT SEGMENT

 by 

PRESSING

 the 

MODE

 key. Repeat 

programming sequence (up to 9 individual segments). 

5. 

PRESS SET/CLEAR

 to exit the setting sequence at any time.

CALIBRATING THE COMPASS 

The Enduro Trailhead is equipped with a digital magnetic compass with reading in 
one-degree increments. The compass can be adjusted to compensate for the magnetic 
declination corresponding to the area where the compass is being used.

The compass must be calibrated on a regular basis. 

The compass should be 

calibrated any time it does not seem to be working properly. We recommend calibrating 
the compass prior to any activity where optimal accuracy is desired, such as a long back 
country trip. 

NOTE:

 To save power, the compass feature of the unit only remains active for 

a period of 10 seconds. To reactivate the compass display, 

PRESS 

the 

START/

LAP

 or 

STOP/NEXT 

key.

(

CONTINUED

NEXT

PAGE

)