background image

16

Maintenance and Warranty

This marking indicates that this product should not be disposed  

with other household wastes throughout the EU. To prevent possible 

harm to the environment or human health from uncontrolled waste 

disposal, recycle it responsibly to promote the sustainable reuse  

of material resources. To return your used device, please use the return 

and collection systems or contact the retailer where the product was 

purchased. They can take this product for environment safe recycling.

All product images shown in this instruction manual are for illustrative purposes only and may differ slightly from the actual product.

Cleaning and storage

Use a soft cloth dipped in a small amount of water to wipe the eScooter; for any difficult  

to clean areas, you can use toothpaste and gently brush with a toothbrush, then use a damp 

cloth to clean.

Do not use alcohol, petrol, kerosene, or other corrosive, volatile chemical cleaning solvents, 

as this will seriously damage the appearance and internal structure of the body. Do not use 

pressure washers to clean. Ensure that the charging cable has been unplugged and the 

rubber stopper on the charging port is closed. Otherwise, there may be a chance of electric 

shock or serious failure due to internal water intake.

Warranty policy

techtron® offers a one-year guarantee on rechargeable batteries. Two-year guarantee 

against parts and/or manufacturing defects, Terms & Conditions/Exclusions apply,  

please see website for further details.

Product registration

For exclusive offers, product support and information on the latest techtron® innovations, 

register your product by completing the form on the website with your serial number  

and details - https://techtron.co/pages/warranty

Battery maintenance and disposal

Do not touch the battery contacts, and do not open or expose the shell. Avoid metal objects 

touching the battery contacts, as this will cause a short circuit, damage to the battery,  

or even personal injury. 

Please refer to the model specifications in this manual for your eScooter’s charging 

requirements. Only use a charger with the correct voltage otherwise there will be a risk  

of damage to components or fire. 

Ensure batteries are disposed of responsibly. Recharge the battery and store after use,  

in order to preserve battery life. Do not place the battery in high temperatures higher than 

50°C or below -20°C, or it may lead to battery failure, overheating, or even risk of fire.  

Always store in a cool dry place fully charged. A battery will be at optimum performance  

at a standard room temperature. Warranty may be invalid if the battery is removed.

Summary of Contents for Pro 3500





















Reviews: