TECHWOOD 2443144, Operating Instructions Manual

English   - 18 -

IF YOU NEED ANY ASSISTANCE OR A CUSTOMER REFERENCE NUMBER PLEASE CONTACT THE 

TECHWOOD HELP LINE ON 0845 543 0485

 Select your  

Country

 ,  

Language

  and  

Text language

by using “ ” or “ ”  and  “ ” or “ ” buttons. Press 
 “

OK

”  or  

RED

  button to continue. To cancel, press 

BLUE

  button. The following menu will be displayed 

during the automatic tuning: 

 After APS is 

fi

 nalized, the programme table will appear 

on the screen. In the programme table you will see 
the programme numbers and names assigned to the 
programmes. 

 Manual Channel Scan 

 In manual channel scan, the number of the multiplex is 
entered manually and only that multiplex is searched 
for the channels. For each valid channel number, signal 
level and  signal quality are shown on the screen.
In both manual and auto search any existing channel 
in the database is not re-stored to avoid redundant 
duplicates of that channel. 

 First Time Installation 

 The user can use this item to load default settings, 
which were loaded to the receiver at the factory.
To install factory settings, highlight “First Time 
Installation” menu item and press  “

OK

”  button, 

then you will be asked whether or not to delete the 
settings. Selecting “Yes” by pressing  “

OK

”  button 

while the “Yes” is highlighted will delete the existing 
channel table.
Then you will be asked to con

fi

 rm for deleting all 

channels and settings: 

 By selecting Yes and pressing the  “

OK

”  button, the 

existing channel table will be deleted. After factory 

settings are loaded, “First Time Installation” menu 
will be displayed.
The menu which is displayed for language selection 
appears on the screen at 

fi

 rst. By using  “ ” or “ ” 

buttons, select the desired language option, and press 
OK button to activate. 
 After then, “First time installation” OSD will appear 
on the screen. By pressing “ ” or “ ” buttons, select 
the  

Country

  you want to set and press  “

OK

”  button 

(* only for EU countries). 

 Press the  “

OK

”  button to start installation. After search 

is completed for digital channels, a message asking 
whether to search for analogue channels appears 
on the screen.This process is same as described in 

Automatic Search

 section. 

 . 

   Analogue TV Menu System 

  Picture Menu 

 Mode 

 For your viewing requirements, you can set the related 
mode option.
Press “ ” or “ ” button to select  

Mode

 . Press “

” or “ ” button to choose from one of these options:  

Cinema

 ,     

Dynamic

  and  

Natural

 .  

 Brightness/Contrast/Colour/Sharpness/
Hue 

 Press “ ” or “ ” button to select the desired option. 
Press “ ” or “ ” button to set the level. 

Note

 :  

Hue

  option can only be visible when the TV receives 

an NTSC signal. 

 Colour Temp 

 Press “ ” or “ ” button to select  

Colour Temp

 . Press 

“ ” or “ ” to choose from one of these options:  Cool , 
 Normal  and  Warm . 

01_MB45M_[GB]_3902UK_IDTV_BRONZE14_26884W_10073456_50191025.indd   18

01_MB45M_[GB]_3902UK_IDTV_BRONZE14_26884W_10073456_50191025.indd   18

11.05.2011   17:29:38

11.05.2011   17:29:38