TECHWOOD 2443144, Operating Instructions Manual

English   - 8 -

IF YOU NEED ANY ASSISTANCE OR A CUSTOMER REFERENCE NUMBER PLEASE CONTACT THE 

TECHWOOD HELP LINE ON 0845 543 0485

   Connecting the LCD TV to a 
PC 

 For displaying your computer’s screen image on 
your LCD TV, you can connect your computer to the 
TV set. 
 • Power off both computer and display before making 

any connections.

• Use 15-pin D-sub display cable to connect a PC 

to the LCD TV.Use an audio cable between audio 
inputs of the TV (side) and audio output of your PC 
to enable sound connection.

• When the connection is made, switch to PC source. 

See  “Input selection” section.

• Set the resolution that suits your viewing requirements. 

Resolution information can be found in the appendix 
parts. 

SPDIF

SCART

VGA

Coax.OUT

HDMI

 1

PC  audio  cable

(not  supplied)

to  AUDIO  INPUTS 

on  the  TV

PC  RGB  cable
(not  supplied)
to  PC  input

Audio

Inputs

PC  Input

   Connecting to a DVD Player 

 If you want to connect a DVD player to your LCD 
TV, you can use connectors of the TV set. DVD 
players may have different connectors. Please refer 
to your DVD player’s instruction book for additional 
information. Power off both the TV and the device 
before making any connections. 

 Note

: Cables shown in the illustration are not supplied. 

 • If your DVD player has an HDMI socket, you can 

connect via HDMI. When you connect to DVD player 
as illustrated below, switch to HDMI source. See, 
“Input Selection” section.

• Most DVD players are connected through 

COMPONENT SOCKETS. Use a component 
video cable to connect video input. To enable sound 
connection, use AUDIO IN located side of the TV 
(YPbPr cable is not supplied).

• When the connection is made, switch to YPbPr 

source. See, “Input selection” section.

• You may also connect through the SCART socket. 

Use a SCART cable as shown below.

HDMI

inputs

Scart  sockets

Component 

video

inputs

Component 

audio

inputs

DVD  Player

Note

 : These methods of connection perform the same 

function but in different levels of quality. It is not necessary 
to connect by all three methods. 

 Using Side AV Connectors 

 You can connect a range of optional equipment 
to your LCD TV. Possible connections are shown 
below. Note that cables shown in the illustration are 
not supplied. 
  • For connecting a camcorder, connect to the VIDEO 

IN socket and the AUDIO SOCKETS. For selecting 
the related source, see the section “Input selection” 
in the following parts. 

• To listen the TV sound from headphones, connect 

to the HEADPHONE jack of theTV 

Camcorder

Headphone

01_MB45M_[GB]_3902UK_IDTV_BRONZE14_26884W_10073456_50191025.indd   8

01_MB45M_[GB]_3902UK_IDTV_BRONZE14_26884W_10073456_50191025.indd   8

11.05.2011   17:29:30

11.05.2011   17:29:30