10
With this program play function, you can program up to 32
tracks in any desired order.
Before beginning:
Programming can be done only in the stop mode.
Programming with music skip button
1. Press the program button in the stop mode.
2. Select a DISC by using the DISC SKIP button.
3. Select the desired track by using the music skip(
,
)
button.
Example :
Track No. 5 on the Disc No.5.
4. Press the program button again.
- Then, the 5th track has been programmed as program
No.1.
5. Repeat step 2 and step 3 and step 4 to continue
programming other tracks.
6. Press the play (
) button.
- The program play will start in the programmed order.
Program Play
For your reference:
“FULL” appears on the display when the 33rd track has
been programmed (no further programming is possible).
Only track numbers actually on the disc can be pro-
grammed.
The programmed play sequence is not lost even if the
unit is turned off.
The unit will stop automatically when all programmed
tracks have finished playing, and the programmed con-
tents disappear from the display.
It is possible to program with the disc tray opened.
Note :
If you press the program button while programming, pro-
gramming will cease and change into the program recall
mode.
If you stop playback, the programmed contents will disap-
pear from the display, but they are not lost from the mem-
ory. Press the program button when you want to recall
the programmed contents.
The program is enabled even if the tray is open.
Recalling the program
1. Press the program button.
- Then the first programmed track will appear on the dis-
play.
2. Press the button repeatedly if you want to check the pro-
grammed contents.
- Each time the button is pressed, the next programmed
contents will appear on the display in the programmed
order.
3. Press the play (
) button at any time if you want to play
the disc in the programmed order.
