11
REMOTE CONTROL UNIT
Using the Remote Control Unit
By using the provided remote control unit, the receiver and
matched optional components CDC-85 and TDX-85 can be
controlled from your listening position.
To use the remote control unit, point it at the REMOTE
SENSOR window of the receiver.
REMOTE SENSOR window
of the receiver
Notes :
Even if the remote control unit is operated within the
effective range, remote control operation may be impossi-
ble if there are any obstacles between the unit and the
remote control.
If the remote control unit is operated near other
appliances which generate infrared rays, or if other
remote control devices using infrared rays are used near
the unit, the stereo may operate incorrectly. Converseiy,
the other appliances may also operate incorrectly.
Battery Installation
1. Remove the battery compartment cover.
2. Insert two “AAA” (R03, UM-4) dry batteries.
Make sure that the batteries are inserted with their posi-
tive and negative poles positioned correctly.
3. Close the cover until it clicks.
Battery Replacement
If the distance required between the remote control unit
and main unit decreases, the batteries are exhausted. In
this case replace the batteries with new ones.
Precautions concerning batteries
Be sure to insert the batteries with correct positive “
”and
negative “
” polarities.
Use batteries of the same type. Never use different types
of batteries together.
Rechargeable and non-rechargeable batteries can be
used. Refer to the precautions on their labels.
When the remote control unit is not to be used for a long
time (more than a month), remove the batteries from the
remote control unit to prevent them from leaking. If they
leak, wipe away the liquid inside the battery compartment
and replace the batteries with new ones.
Do not heat or disassemble batteries and never
dispose of old batteries by throwing them in a fire.
