8
CONTROLS AND INDICATORS
Front Panel
1. STANDBY/ ON button and Indicator
When in standby mode, a red indicator will light up.
When you press the POWER button, power will be turned
on and the green indicator will light up.
2. LINE STRAIGHT button and Indicator
Press this button to bypass the bass and treble tone con-
trol, and surround mode. The indicator will light up.
Press the button again to release it.
3. SPEAKER selector buttons
These buttons are used to select the speaker system
“MAIN” or “SURROUND”. The corresponding LED light
will be turned on.
4. REMOTE SENSOR
5. DISPLAY
6. LOUDNESS
When listening at a low volume level, you can press
this switch to boost bass.
Press the switch again to release it.
IMPORTANT :
Never activate the loudness button when playing
the stereo above the 50% volume level or damage
will occur to your speakers and stereo.
7. MASTER VOLUME
8. TREBLE control
Use to adjust high frequency response.
9. BASS control
Use to adjust bass response.
10. BALANCE control
Use to balance volume between the left and right main
speakers.
11. VIDEO 3 Audio and Video terminal
For connection of portable video component such as a
camcorder.
12. INPUT SOURCE selector
PHONO :
Press to listen to a record on optional turntable.
“PHONO“ appears in the display.
TUNER :
Press to listen to a radio broadcast.
TAPE MONITOR :
Press to listen to a tape.
“TAPE M“ appears in the display.
CD :
Press to listen to a CD.
“CD“ appears in the display.
VIDEO 1 :
Press when playing a video component connected
to this input.
“VIDEO 1“ appears in the display.
VIDEO 2 :
Press when playing a video component connected
to this input.
“VIDEO 2“ appears in the display.
DVD/VIDEO 3 :
Press when playing a video component connected to
this input.
“DVD“ appears in the display.
13. HEADPHONE jack for optional headphones.
