8
4. Install the heating element (1) above the tank.
(making sure that it is not connected to the mains) and insert the safety switch at
its place (2).
Note: Caution ! if the heating element is not correctly positioned on the safety
switch, the barbecue will not work.
5. Place the grid (1) above the heating
element.
Clamp the lugs of the grid in the holes of
the tank (2) provided for this purpose.
FIRST USE
• First
, remove the heating element.
• Remove any packaging material that may be present.
• Clean the grilling grid and the grilling trough with a
damp sponge or cloth.
• Assemble the grill.
Before using for the first time, fill the grill tray with water and use it for 15 minutes
to remove the protective film from the heating coil. The presence of smoke is
normal and will stop after few seconds or minutes.
Make sure that a sufficient level of ventilation is available.
USE
Unroll the power cord completely.
Check that the rated courant in the country where you are, corresponds to that
indicated on the apparatus.
