10
Dry ironing (without steam)
- Iron without pressing the steam activator and keep the steam flow control to the
closed position.
Fill the water tank while ironing
- The water tank contains pressure-less water and can therefore be refilled at any
time. This means that it is possible to iron without stopping.
See "How to fill the water tank".
After ironing
1. Always put the iron back on the stand.
2. Turn the thermostat to the "MIN" position,
3. Stop the unit by pressing the On / Off button and then disconnect the unit from
the main power supply.
4. Allow the iron to cool before any intervention.
ADVICE
- If the article consists of different types of fibbers, always select the temperature
required by the most delicate fibber, that is to say : the lowest temperature.
For example, if the fabric consists of 60% polyester and 40% cotton, it
should be ironed at the temperature indicated for the polyester (
●●
).
- If you do not know which fabric (s) the item is made of, determine the correct
ironing temperature by ironing a piece of fabric that will not be visible when it is
used.
- Silk, wool and synthetic materials : iron the back of the fabric to avoid bright
spots.
- Fabrics that tend to acquire bright spots should be ironed in one direction while
applying very little pressure.
- Start ironing items that require the lowest ironing temperature, that is, those
made of synthetic materials.
Note : To cool the iron faster, simply iron a clean cloth after turning off the power.
CLEANING AND MAINTENANCE
•
Before cleaning, Always : switch off the appliance, disconnect the apparatus
and let it cool.
•
Clean the outside of the apparatus with a sponge or slightly wet linen.
•
Never plunge the apparatus in water or all other liquid !
•
Do not use abrasive cleaners, gritting, or metal brush or another cutting object.
•
Replace the iron the its support and store the steam generator in a dry and
clean place.
Note: Damage caused by improper maintenance, improper use of the appliance or
