FILLING THE WATER TANK
1. Set the steam control to the closed position.
2. Hold the iron by the handle and tilt it 10º to fill it. Run the water through the filling
inlet.
3.Clean the outside of the tank if water has leaked out of the tank.
4.After ironing, always empty the water tank.
5.The tap water is usable. However, if the water in your area is very hard, it is
advisable to use distilled water.
BEFORE FIRST USE
Fill the tank with water (without exceeding the maximum level) before connecting it.
Plug the iron into an outlet in good condition.
Selecting the temperature • • The indicator light comes on, indicating that the iron is
starting to heat up.
When the desired temperature is reached, the indicator goes off and the iron is ready
for use.
For this first use, test clean cloth or used cloth.
First, let the steam come out for at least 1 minute and press the express steam
button and the spray button several times, to clean the tank of any manufacturing
impurities.
Notes: During this operation a slight smoke may be released from the hearth or
iron for a few moments; This is normal.
During ironing, it is normal for the indicator light (ie the thermostat) to turn
on and off automatically to maintain a constant temperature.
It is always easier to iron fabrics or slightly damp clothes.
9
