10
•
Stand the appliance on a table or flat & stable surface.
•
The item must not be left unattended when it is connected to main supply.
•
The item is not to be used, if it has been dropped or if there are visible signs
of damage or if it is leaking.
•
Never modify the appliance in anyway.
•
To avoid a circuit overload, do not operate another high wattage appliance
on the same circuit.
•
When the iron is returned to its iron rest, make sure that the surface that
supports the iron rest is stable.
•
The iron must be used and rested on a stable surface.
TEMPERATURE ADJUSTMENT
• Low temperature for fabrics - Acrylic- Nylon - Polyester - Rayon - Synthetic
• • Average Temperature for Wool - Silk
• • • High temperature for Cotton - Linen
Spraying
Regardless of the temperature used, by pressing the spray button several times,
the laundry can be softened and wet for easy ironing. Always make sure there is
enough water in the tank.
Shot of steam
By press powerful steam button, an intense shot of steam is emitted from the
soleplate. This can be very useful e.g. when removing stubborn creases.
Notes : The shot of steam facility can be used only while ironing with middle or
high ironing temperature.
By pressing the shot of steam, Powerful steam can also be applied when
holding the iron in a vertical position. This is useful for removing creases
from hanging clothes, curtains, etc.
Steam-ironing
Steam-ironing is only possible at higher ironing temperatures ;
··
for moderate steam,
···
for maximum steam.
Set the steam controller when the thermostat is specifically set to Steam mode.
Steam is produced as soon as the iron is in a horizontal position.
The production of steam is interrupted as soon as the iron is kept in a vertical
position.
