1. Lid
2. Cone 1
3. Cone 2
4. Filter 1
5. Filter 2
6. Juice tank
7. Base with motor
8. Pressure Lever on Citrus
ASSEMBLY
Place the juice container (6) on the base (7).
Place the chosen filter (4 or 5) on the tank (6).
Choose the cone according to the size of the citrus fruit to be squeezed
Place cone 1 or cone 2 (2 or 3) on the filter.
USE
● Unroll the power cord completely.
● Check that the tension in force in the country where you are corresponds to
that indicated on the apparatus.
● Connect the apparatus in a correct socket-outlet, (and connected to the ground
if the unit is Class I), to avoid any danger.
● Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
● Stand the appliance on a table or flat surface.
● Never modify the appliance in anyway.
OPERATION
1. Plug the unit into a good electrical outlet.
2. Cut the citrus fruit in half.
3. The appliance will start automatically by pressing with the pressure handle on
the half citrus fruit placed on the extraction cone.
4. To stop the unit, do not apply pressure anymore to the cone.
5. Place a glass under the anti-drip spout.
6. Press the spout down to pour the juice into the glass.
Notes: Rotation can be left or right
The device stops automatically as soon as you stop applying pressure to the
cone.
7
