5
KNOW YOUR DEVICE
1. Vinegar outlet
2. Oil outlet
3. Handle to activate the spraying
4. Adjustable movable scale
5. Immersion tubes
6. White tip for soaking in oil
7. Black tip to soak in vinegar
8. Transparent tanks
9. Vinegar tank
10. Oil tank
FIRST USE
. Remove the pump for cleaning.
. Grasp the pump by the dosing scale, turn it counter clockwise and lift it.
. Clean all parts according to the instructions in section " Cleaning and
maintenance ".
. Hang the two containers together and fill the one marked "Oil" with oil the one
marked "Vinegar" with vinegar.
Notes : Each bottle can hold 100ml.
Oil and vinegar must not contain spices or any solid as it may block the
spray function.
. Put the pump back in place.
Note : Make sure that the tube with the white pump filter (at the end of the tube), is
placed in the bottle with oil and the tube with the black pump filter (at the
end of the tube), is placed in the bottle with vinegar.
. Turn the pump clockwise to lock it.
. Adjust the dosage (see below) and pump out the oil and / or vinegar by
repeatedly pressing the trigger.
. The fineness of the diffusion of the oil and / or vinegar depends on the speed at
which the trigger is pressed.
For a fine application of the oil and vinegar, pull the trigger quickly.
For a thicker application, pull the trigger slower and more gently.
NOTE : IT IS RECOMMENDED TO KEEP THE TANKS FILLED 80% FOR
OPTIMAL OPERATION.
